GEOMETRIC SLANT
Custom computer case
Hello everyone. This build log is a custom computer case I am in the process of designing. The machine inside (parts listed below) will be completely water-cooled when I am done.
THE SPEC LIST:
-PC specs-
Motherboard - ASUS Z97-AR (Have)
CPU - Intel Core i7 4790k (Have)
GPU - EVGA GeForce GTX 780Ti x2 (Need 2nd card)
RAM - Corsair Vengeance 16GB (Need 16GB more)
PSU - EVGA SuperNOVA 850w G2 80+ gold (If I only do one GPU)
Storage: Boot - Intel SSD 128GB
Storage: Mass - WD Black 1TB
-Watercooling specs-
Bitspower fittings:
Deluxe White
EKWB Water blocks:
Supremacy EVO CPU block
EKWB Res:
Still not sure on Radiators, pump, tubing and coolant. I am open to suggestions.
THIS CASE, may look unappealing on the outside, but there is a reason I am calling it, "Geometric Slant." the inside components and all going to be on a 30* angle.
The case is 25" or 635mm tall, 26" or 660.4 long and 15" or 381mm wide
Here are some pictures of the case so far:
REMEMBER THIS IS EARLY IN THE DEVELOPMENT CYCLE
Please comment, I will be interacting with everyone!
~Yahhms
-Mentions-
Scroll down for more pictures and updates!