So, I would like to start this off by saying hi i'm TrueDerp and yes this is going to be something completely different. It has nothing to do with computers but it being a build log and all I decided to put it in here instead of somewhere else on the forums.
Please Read
It will make a lot more sense then...
This build log is going to be for a project that I have been planning for two years now. This project as I stated above has nothing to do with computers but instead music. I got the idea from a while ago when my friend threw a 2.1 channel speaker system for computers in a backpack to take to my house. Us being as lazy as we were just left it in the backpack and plugged it in, it didnt sound that bad then it struck me. Why not make a backpack with speakers in it. Being as young as I was (14 at that time, so yes that means i'm 16 I got into computers when I was young) I couldn't just go out and buy a speaker system rip it apart and then throw it all in a backpack. So over two years I have learned all I can about home and car audio. Being 16 now I have a job and can finally build what has been on my mind for two long years. Even with a job I wasnt planning on going out and buying new speakers just so I can rip them apart, to me it kind just seemed like a waist of, well brand new speakers haha. So instead I scavenged my house for old home/computer audio "things" I pulled out two 5.1 channel computer speakers. One was adele (dell) and the other was an old Kynio. The dell had a nice 4in 60W 6ohm subwoofer and came with 4 2in 5w 4ohm speakers and two 2X3in 5w 4ohm speakers. The kynio had a quite frankly amazing 5in 20w 4ohm subwoofer that in the original box would shake things off my dresser. It also came with five 3in speakers sadly they where old and the quality of them is not close to the dell speakers. Once I pulled out all the speakers I decided on which speakers I would use, I of course took the dell speakers and the kynio subwoofer. Then came the issue of, how the hell am I soposed to power these. I went out and bought a 12v 4amp atv battery, shortly after I purchased a 400w inverter off of amazon. This is where work halted for a long time, I was short a lot of cash and only recently got some more to spend and now we are here, in current time.
In the past few weeks I have finally gotten around to drafting the design for the speaker box that will go inside my backpack and provide all the components a place to be mounted to. Instead of drawing this out on cad I decided to go ahead and use some old drafting paper I have lying around and this is what I ended up with in the beginning. 
So all in all its pretty basic. Three days later I finally have come down to the final design.
I say final but its not quite the final design, I still need to fiddle around with the port's and how big they will be.
I'll leave this portion here for now, and update you in a couple of days about future plans like materials i'm going to use and other "interesting" things. Once again I would like to just put this out there that this isnt a computer build log... So you dont have to comment saying that it isn't one haha. This is indeed a Derp log that will stick out among others but I hope you all enjoy it, please voice your opinions I would love to see input on materials, design and other aspects of this "build".
Yours untruly
TrueDerp